2012 Hot Sale Quantum&TENS 2 in 1 Analyzer

2012 Hot Sale Quantum&TENS 2 in 1 Analyzer 1.Analyzer and detox function 2.Portable 3.OEM/ODM 4.CE certification

            2012 Hot Sale Quantum&TENS 2 in 1 Analyzer

              

TENS Treatment Guidance

This device is coming with the TENS Pads and Slippers treatment function, which is very effective and easy to use.

What is TENS

Transcutaneous electrical nerve stimulation (TENS) is a therapy that uses electrical current delivered through electrodes to the skin for pain relief. Electrical stimulation of the nerves may encourage the body to produce natural painkillers called endorphins, which may block the perception of pain.

TENS is done with a small, battery-powered machine about the size of a pocket radio. Usually two electrodes, wires that conduct electrical current, are connected from the machine to the skin. The electrodes are often placed on the area of pain or at a pressure point, creating a circuit of electrical impulses that travels along nerve fibers.

The machine can be set for different wavelength frequency, such as a steady flow of electrical current or a burst of electrical current, and for intensity of electrical current. These settings are usually determined by your physical therapist or doctor.

After an introduction to and instruction in this therapy, TENS can be done at home.

What is TENS used for

TENS is used to relieve pain for several different types of illnesses and conditions. It is used most often to treat muscle, joint, or bone problems that occur with illnesses such as osteoarthritis or fibromyalgia, or for conditions such as low back pain, neck pain, tendinitis, or bursitis. TENS has also been used to treat sudden (acute) pain, such as labor pain, and long-lasting (chronic) pain, such as cancer pain.

Although TENS may help relieve pain for some people, its effectiveness has not been proven, and it is not considered to be a long-term solution to pain.

Is TENS safe

TENS is generally considered safe, although the machine could harm an adult or child if misused. Have your physical therapist or doctor show you the proper way to use the machine, and follow these instructions carefully.

Operation Instruction

TENS Treatment

1.) Relax before therapy.

2.) Put the pole plugs into two pole window patching (and also the slippers) and turn on the switch.

3.) Put the pole window patching on the part to receive therapy. Put on the slippers.

4.) During treatment, the feet and the part that the pole window patching touches will gradually feel the librations of the frequency wave. Then turn the treatment knob to the strength that one can afford. It's normal that the left and the right wave may be different.

5.) 15-30 minutes in each part of the body. 1 ~ 2 times a day. 10 days forms 1 treatment period.

The place of setting the slice:

 

Testing Regulation

Testing Procedures

1. When the power supply of the computer is not turned on, inspect whether the computer, the sensor, the printer and other equipment are connected well; the probe of the tester must be plugged tightly;

2. Survey and record the basic conditions (name, sex, date of birth, etc.) of the tested person;

3. Start the computer and inspect whether the computer, the sensor the printer and other equipment run well;

4. Prompt the tested person to relax the feeling, not to speak and to keep steady breathing;

5. Require the tested person to grasp the test rod by the left or right hand;

6. Close all other application programs and open [Quantum Resonance Magnetic Analyzer] for testing.

7. During testing, the test person’s skin should not be touched; the hand should naturally press to grasp the test rod and not wobble.

8. After the testing is finished, the instrument should be cleaned to make it be in a good standby condition.

Work Systems of the Testing Room

1. Keep the testing room clean and quiet, and pay attention to electrical safety.

2. Before testing, metal and communication equipment on the tested person’s body should be removed for proper placement.

3. Those who wear pacemakers are not appropriate for testing.

4. During work, inspect whether the power supply and the testing system are in a good using condition.

5. In the testing process, the operational regulation must be strictly observed.

6. Out of work, cut off the power supply and clear up the used equipment and the tester to make them be in a good standby condition.

Important Notice for the Tested Person

1. Should not drink wine and coffee, not eat health products and try not to take medicine two days before testing.

2. Keep regular life and normal sleep two days before testing.

3. After intense activity, have a rest 1-2 hours before testing.

4. Testing should be carried out in semi-fasting.

5. Keep loose and warm clothing.

6. Remove the metal articles and communication equipment on the body before testing.

7. Relax the feeling, not speak and keep steady breathing during testing.

Testing Technician's Duties

1. The test technique of [Quantum Resonance Magnetic Analyzer] is very accurate, so the testing technician must learn with effort and an open mind, actively accumulate experience and continuously improve the test technique.

2. During work, the testing technician should be in peace of mind and be kind, treat the tested person compassionately, earnestly and correctly operate and accurately select the point.

3. Before testing, the testing technician should measure the tested person’s stature, weight, blood pressure and pulse and record the relevant items.

4. The testing technician should be responsible for cleaning, maintaining and storing the tester and the relevant equipment of [Quantum Resonance Magnetic Analyzer].

Maintenance Methods of the Tester

1. The software and hardware system must be installed according to the operational instruction.

2. [Quantum Resonance Magnetic Analyzer] is an electronic product with high sensitivity, so it can not be hit and extruded.

3. It is strictly forbidden to put in the high-temperature, wet, corrosive and radioactive place, avoiding the direct sunlight.

4. When it is not in use, the test rod is wiped cleanly by a piece of soft cloth or a cotton ball and then is stored in the packaging box.

5. The line of the sensor should not be in over stretch, so as not to fall off.

6. Strictly forbid non-professional maintenance staff to disassemble the sensor.

After Sale Service

1) Main part has one year warranty.

2) Within three months,free to change the spare parts if come up quality problem.

3) User manual.

4) Lifetime technology supports.

2012 Hot Sale Quantum&TENS 2 in 1 Analyzer